Instruction Manual Smart Lights Switch Module

Hbot-4CH

4-Channel Smart Light Switch Module

4 Channels IP20 7A/ch 110×45×25mm

Features

Global international operation Whenever & Wherever You are, All-in-one Mobile App

Schedule timer
Voice control-work with Google Home
Voice control-work with Amazon Alexa
Device Sharing
In-house local operation

Installation

⚠️

Installation must be carried out by a qualified electrician in accordance with local regulations.

⚠️

Keep the device out of the reach of children.

⚠️

Keep the device away from water, damp or hot environment.

⚠️

Install the device away from strong signal sources such as microwave oven that may cause signal interruption resulted in abnormal operation of the device.

⚠️

Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.

⚠️

Do NOT attempt to disassemble, repair or modify the device.

Installation Steps

1
Disconnect Power

Turn off the circuit breaker and use the electrical tester to test the power.
Ensure the circuit breaker is off before wiring.

Technical Specifications

SpecificationValue
Product TypeHbot-4CH Module
Voltage90-250V AC 50/60Hz
Lights7A
Max Combined Current30A (Total for both channels)
Wireless Protocol2.4GHz Wi-Fi (IEEE 802.11 b/g/n)
Operation Temp.-10ºC - +40ºC
Case Temp.Tc: +80ºC (Max.)
Operation Range≤ 300 m
Dims (WxDxH)110x45x25 mm
IP RatingIP20

Wiring Diagram

four Independent Lights

Two-Way Switching

Wiring Instructions and Diagrams:

ℹ️

Put your smartphone close to the curtain switch module when you're configuring, and make sure you have min. 50% Wi-Fi signal.

Manual Override

The curtain switch module terminal reserves the access of manual override function for the end-user to switch on/off.
Switch on/off for permanent on/off function. Notes:

Preparation For Use

Download Hbot App on App store or scan the QR code

Registration or Log in

Download "Hbot" Application. Enter the Register/Login interface; tap "Register" to create an account by entering your phone number to get verification code and "Set password". Choose "Log in" if you already have a Hbot account.

Add Device

Make sure your phone has successfully connected to a Hbot-4CH.

Reset: Press the reset button for more than 7 seconds until the status LED flashing continuously at a fast rate, indicating that the device is now in pairing mode

Enter the settings menu and follow the steps shown in the image to add the device to your home Wi-Fi network.

1

Select Add Device → LED is blinking.

2

The device will automatically connect to the home Wi-Fi network.

3

The pairing process may take 10 to 60 seconds, depending on network conditions

Add the device successfully, you can edit the name of the device to enter the device page by click "Done".

Smart Device Linked Voice Speaker

Complete product networking configuration in the App

Complete the device's networking configuration according to the prompts in the App. Note: In the App, change the name of the device to an easily identifiable name such as Alexa; names are usually in English, such as "bed light".

How to connect Smart Device to Amazon Alexa.

  1. Launch Hbot App, sign into your account and make sure Smart Device is on the device list.
  2. Minimize Hbot App, then launch the Alexa App and sign in your Alexa account and make sure you have at least one Alexa smart speaker-controlled device installed like Echo dot, etc.
  3. In the Bottom right corner of Home page, press the button to show APP Menu. Then select in the menu.
  4. Click on the search button in the upper right corner, enter "Hbot" in the search box, and then search.
  5. Enable Hbot Smart Skill then sign in your Hbot account to complete your account set up.
  6. After successfully logging into your account, you need to give Alexa 20 seconds to search for devices. Once the device is successfully discovered, your Hbot application is now paired with Alexa. Clicking " " will display all available devices in your APP, and now you can control smart devices through Alexa.

How to connect Smart Device to Google Home

  1. Launch the Google Home App and make sure Google Home speaker is installed. If not, please follow Google Home speaker installation instruction to complete the installation.
  2. Open the Google Home app and click on the plus sign in the top left corner to enter the "add and manage" page, then click on "Set up device".
  3. Enter "Hbot" in the search box and then search for it. Enable Hbot smart skills, and then log in to your Hbot account to complete the account setup. After successfully logging into your account, you need to wait 20 seconds to search for devices. Once the device is successfully discovered, it means that your Hbot application has been paired with Google Home, and all available smart devices are displayed on the homepage upon returning. Now you can use Google Home to control your smart device.

Service

Thank you for your trust and support to our products, we will provide you with a two-year worry-free after-sales service (freight is not included), please do not alter this warranty service card, to safeguard your legitimate rights and interests. If you need service or have any questions, please consult the distributor or contact us.

Product quality problems occur within 24 months from the date of receipt, please prepare the product and the packaging, applying for after-sales maintenance in the site or store where you purchase; If the product is damaged due to personal reasons, a certain amount of maintenance fee shall be charged for repair.

We have the right to refuse to provide warranty service if:

Recycling Information

♻

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities.

Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

Warranty Card

Product Information

 
 
 
 
 
 
 
 

Maintenance Records

Failure dateCause Of IssueFault ContentPrincipal